Hardware options installation 57
— Slot 1 of the two-slot PCI riser cage assembly
— Slot 2 of the two-slot PCI riser cage assembly
16. Install the access panel (on page 21).
17. Do one of the following:
o Slide the server into the rack.
o Install the server into the rack ("Installing the server into the rack" on page 30).
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server (on page 17).
21. If removed, install the security bezel ("Security bezel option" on page 36).
Installing two M.2 SSDs
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
To Next Page
Loading...
