Hardware options installation 68
7.
Using a T-10 screwdriver, remove the blank from the FlexbleLOM slot of the riser cage.
Retain the blank for future use.
8. Install the FlexibleLOM adapter:
a. Firmly seat the FlexibleLOM adapter in the slot.
b. Secure the FlexibleLOM adapter with a T-10 screw.
9. Install the PCI riser cage (on page 23).
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all PCI slots have either an expansion slot cover or an expansion board installed.
10. Install the access panel (on page 21).
11. Do one of the following:
o Slide the server into the rack.
o Install the server into the rack ("Installing the server into the rack" on page 30).
12. Connect each power cord to the server.
13. Connect each power cord to the power source.
14. Power up the server (on page 17).
15. If removed, install the security bezel ("Security bezel option" on page 36).
GPU riser cage assembly
For more information on the riser board slot specifications, see "PCIe riser board slot definitions (on page
10)."
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
To install the component:
To Next Page
Loading...
