Software and configuration utilities 77
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or
in both modes.
Software or configuration utility Server mode
HPE iLO (on page 77)
Active Health System (on page 78)
RESTful API support for iLO (on page 79)
Integrated Management Log (on page 79)
HPE Insight Remote Support (on page 79)
HPE Insight Online ("Insight Online" on page 80)
Intelligent Provisioning (on page 80)
HPE Insight Diagnostics (on page 81)
Erase Utility (on page 81)
Scripting Toolkit for Windows and Linux (on page 82)
Service Pack for ProLiant (on page 82)
HP Smart Update Manager (on page 82)
HPE UEFI System Utilities (on page 82)
HPE Smart Storage Administrator (on page 85)
FWUPDATE utility (on page 87)
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
HPE iLO
The iLO subsystem is a standard component of ProLiant servers that simplifies initial server setup, server
health monitoring, power and thermal optimization, and remote server administration. The iLO subsystem
includes an intelligent microprocessor, secure memory, and a dedicated network interface. This design
makes iLO independent of the host server and its operating system.
iLO enables and manages the Active Health System (on page 78) and also features Agentless
Management. All key internal subsystems are monitored by iLO. If enabled, SNMP alerts are sent directly
by iLO regardless of the host operating system or even if no host operating system is installed.
Embedded remote support software is available on ProLiant Gen8 and later servers with iLO 4,
regardless of the operating system software and without installing OS agents on the server.
Using iLO, you can do the following:
To Next Page
Loading...
Need help?
General