English 93
4 Technical Information
The HP Summary Screen and Setup Program
NOTE In addition to the Exit menu, you can also use the key to save your
settings and exit the Setup program. Use to exit without saving any
changes.
Pressing the or arrow keys while you are on a main menu
screen, will take you to the next menu option. If, however, you are on a
sub-menu screen and you press these arrows, you will stay on that
screen.
Use the and arrow keys to scroll through the items on the
general help screen.
Saving Your Changes and Leaving Setup
When you have made all your changes, you must save them and exit
Setup.
1 Press (twice if necessary) to enter the Exit menu.
2 Select
Exit Saving Changes to save your changes and exit Setup.
The PC Workstation will automatically restart. If you set a User
Password, the PC Workstation will display the power-on prompt. Enter
the User Password to use the PC Workstation.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Power Exit
Item-Specific Help
Plug & Play O/S: [NO] .
Reset Configuration Data: [NO]
[13:06:48]
[11/16/1997]
System Time:
System Date:
Key Click: [Disabled]
Keyboard auto-repeat rate:
[30/sec]
Keyboard auto-repeat delay: [1/2 sec]
Numlock: [Auto]
F1 Help
á
â
Select Item F7/F8 Change Values F9 Setup Defaults
ESC Exit
ßà
Select Menu Enter Select > Sub-Menu F10 Previous Values
napa.bk : napa-ug4.fb4 Page 93 Monday, August 4, 1997 7:20 PM
To Next Page
Loading...
Need help?
General
