English 65
3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
If the CD-ROM Drive Has a Problem
WARNING Be sure to disconnect the power cord and any telecommunication
cables from your computer before you remove the cover to check the
cable connections or jumper settings.
To avoid electric shock and harm to your eyes by laser light, do not
open the CD-ROM drive enclosure. The drive should be serviced by
qualified service personnel only. Refer to the label on the drive for
power requirements and wavelength. Do not attempt to make any
adjustment to the unit. This PC Workstation is a class 1 laser product.
No Sound from the
CD-ROM Drive
If you are having problems with sound when playing a CD:
• Check that the volume control (if present) on the CD-ROM or
CD-RW drive front panel is not set to the minimum.
• Ensure that the disk in the drive is an audio disk and not a photo CD
or data CD.
• If using headphones or external speakers, check that they are
properly connected to the Audio Front Panel (not to the audio jack
for the CD-ROM).
• Check that the CD audio cable is correctly installed and is connected
to the system board.
CD-ROM Drive Is Idle If the drive does not appear to be working, try accessing the disk by
clicking on the drive icon or drive letter assigned to the drive by your
operating system.
napa.bk : napa-ug3.fb4 Page 65 Monday, August 4, 1997 7:20 PM
To Next Page
Loading...
Need help?
General
