3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
66 English
CD-ROM Drive Does
Not Work
• Check that the cables have been properly connected.
• Check that a CD is inserted in the drive.
• Verify that the CD-ROM is declared in the Setup program (select the
Advanced menu and the IDE Devices submenu).
• Verify that the Local Bus IDE adapter item is enabled in Setup
(select the Advanced menu and the IDE Devices submenu and
ensure that Local Bus IDE adapter is set to
Primary).
• If you intend to boot on CD-ROM, make sure that this option is
enabled in Setup (select the Boot menu and the Boot Devices
Priority submenu and ensure that the device is in the boot list).
• For further information refer to the CD-ROM documentation.
napa.bk : napa-ug3.fb4 Page 66 Monday, August 4, 1997 7:20 PM
To Next Page
Loading...
Need help?
General
