1 Setting Up and Using Your PC Workstation
Starting and Stopping Your PC Workstation
12
3 While the initialization program is running, you can complete the
Warranty Registration card that came with this manual.
4 When the initialization routine has finished, click OK and the
PC Workstation will restart.
Creating Back-up Diskettes
It is very important that you create master diskettes for your preloaded
application software and an Emergency Repair Disk for the operating
system as soon as possible. HP recommends that you use new
diskettes. If you need to restore the preloaded application software on
your PC Workstation, you can use these diskettes to do so.
For details on how to create these diskettes, refer to the
documentation for your application software.
Stopping Your PC Workstation
To stop the PC Workstation, make sure that you have exited all
programs and the operating system (if necessary), and then press the
power button on the control panel.
napa.bk : napa-ug1.fb4 Page 12 Monday, August 4, 1997 7:20 PM
To Next Page
Loading...
Need help?
General
