HP MSR1003-8S User Manual

26
Field Descri
p
tion
Square-Sum of round trip time Square sum of round-trip time.
Last succeeded probe time
Time when the last successful probe was completed. If no probes are
successful in an operation, the field displays 0.
This field is not available for UDP jitter, path jitter, and voice
operations.
Last packet received time
Time when the last response packet was received. If no response
packets in a probe were received, the field displays 0.
This field is available only for UDP jitter and voice operations.
Packet loss ratio Average packet loss ratio.
Failures due to timeout Number of timeout occurrences in an operation.
Failures due to disconnect Number of disconnections by the peer.
Failures due to no connection Number of failures to connect with the peer.
Failures due to internal error Number of failures due to internal errors.
Failures due to other errors Failures due to other errors.
Packets out of sequence Number of failures due to out-of-sequence packets.
Packets arrived late Number of response packets received after a probe times out.
UDP-jitter results
UDP jitter operation results.
This field is available only for the UDP jitter operation.
Voice results
Voice operation results.
This field is available only for the voice operation.
RTT number Number of response packets received.
Min positive SD Minimum positive jitter from source to destination.
Min positive DS Minimum positive jitter from destination to source.
Max positive SD Maximum positive jitter from source to destination.
Max positive DS Maximum positive jitter from destination to source.
Positive SD number Number of positive jitters from source to destination.
Positive DS number Number of positive jitters from destination to source.
Positive SD sum Sum of positive jitters from source to destination.
Positive DS sum Sum of positive jitters from destination to source.
Positive SD average Average positive jitters from source to destination.
Positive DS average Average positive jitters from destination to source.
Positive SD square-sum Square sum of positive jitters from source to destination.
Positive DS square-sum Square sum of positive jitters from destination to source.
Min negative SD
Minimum absolute value among negative jitters from source to
destination.
Min negative DS
Minimum absolute value among negative jitters from destination to
source.

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English