HP MSR1003-8S User Manual

27
Field Descri
p
tion
Max negative SD
Maximum absolute value among negative jitters from source to
destination.
Max negative DS
Maximum absolute value among negative jitters from destination to
source.
Negative SD number Number of negative jitters from source to destination.
Negative DS number Number of negative jitters from destination to source.
Negative SD sum Sum of absolute values of negative jitters from source to destination.
Negative DS sum Sum of absolute values of negative jitters from destination to source.
Negative SD average Average absolute value of negative jitters from source to destination.
Negative DS average Average absolute value of negative jitters from destination to source.
Negative SD square-sum Square sum of negative jitters from source to destination.
Negative DS square-sum Square sum of negative jitters from destination to source.
One way results
Unidirectional delay.
This field is available only for the UDP jitter and voice operations.
Max SD delay Maximum delay from source to destination.
Max DS delay Maximum delay from destination to source.
Min SD delay Minimum delay from source to destination.
Min DS delay Minimum delay from destination to source.
Number of SD delay Number of delays from source to destination.
Number of DS delay Number of delays from destination to source.
Sum of SD delay Sum of delays from source to destination.
Sum of DS delay Sum of delays from destination to source.
Square-Sum of SD delay Square sum of delays from source to destination.
Square-Sum of DS delay Square sum of delays from destination to source.
SD lost packets Number of lost packets from the source to the destination.
DS lost packets Number of lost packets from the destination to the source.
Lost packets for unknown reason Number of lost packets for unknown reasons.
Voice scores
Voice parameters.
This field is available only for the voice operation.
MOS value MOS value calculated for the voice operation.
ICPIF value ICPIF value calculated for the voice operation.
Hop IP
IP address of the hop.
This field is available only for the path jitter operation.
Path-jitter results
Path jitter operation results.
This field is available only for the path jitter operation.

HP MSR1003-8S Specifications

General

Brand	HP
Model	MSR1003-8S
Category	Network Router
Language	English