Figure 6-22 System Board Drive Connections – HP Pro 3130
Table 6-8 System Board Drive Connections – HP Pro 3130
No. System Board Connector System Board Label Color
1 SATA1 SATA1 dark blue
2 SATA2 SATA2 white
3 SATA3 SATA3 light blue
4 SATA4 SATA4 orange
5 Media Card Reader JUSB1 white
Removing the Optical Drive
CAUTION: All removable media should be taken out of a drive before removing the drive from the
computer.
To remove the optical drive:
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 87).
2.
Remove the access panel (
Access Panel on page 88).
3.
Remove the front bezel (
Front Bezel on page 89).
4.
Remove the system fan (
System Fan on page 103).
Drives
113
To Next Page
Loading...
