Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-15 Computer Setup—Power
Option Description
After AC Power
Failure
Allows you to select system restart behavior after power loss:
●
Stay Off
●
Power On
●
Auto
S5 Maximum Power
Savings
Disables/enables S5 Maximum Power Savings. Enabling this feature reduces the power of this
system as much as possible in the S5 state. This feature must be disabled if you want to enable
Wake on LAN from S5.
WOL in S5
Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5
during a normal shutdown event. The S5 Maximum Power Savings feature must be disabled in
order to enable limited Wake on LAN from S5.
NX (No Execute)
Allows you to disable/enable the processor's NX feature.
Virtualization
Technology
Allows you to enable/disable the processor's Virtualization Technology feature.
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-16 Computer Setup—Boot
Option Description
Boot-time
Diagnostic
Screen
Disables/enables POST diagnostic messages display during boot.
HP Pro 3125 – Computer Setup (F10) Utilities
21
To Next Page
Loading...
Need help?
General