Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 2-14 Computer Setup—Advanced
Option Description
CPU Type
(view only)
CPU Speed
(view only)
Cache RAM (L2)
(view only)
Cache RAM (L3)
(view only)
Primary Video
Adapter
Allows you to select the boot display device when more than 2 video options are offered by the
system:
●
Onboard
●
PCI-E
SATA1 Controller
Allows you to disable/enable the SATA controller.
SATA1 Controller
Mode
If SATA Controller is enabled, allows you to set the mode to:
●
IDE
●
AHCI
USB Ports
Allows you to disable/enable individual USB ports.
Onboard LAN
Allows you to disable/enable onboard LAN controller.
Onboard LAN Boot
ROM
Disables/enables the boot ROM of the onboard LAN chip.
Supervisor
Password
Allows you to view whether the supervisor password is enabled or disabled.
User Password
Allows you to view whether the user password is enabled or disabled.
NOTE: Only displays if a Supervisor password is set.
Change Supervisor
Password
Allows you to establish, disable, or change the supervisor password.
Change User
Password
Allows you to establish, disable, or change the user password.
NOTE: Only displays if a Supervisor password is set.
Onboard Audio
Allows you to set the onboard audio to:
●
Disabled
●
Enabled
●
Auto
20 Chapter 2 Computer Setup (F10) Utility
To Next Page
Loading...
