2. To release the battery from its holder, squeeze the metal clamp (1) that extends above one edge of
the battery. When the battery (2) pops up, lift it out.
3. With the positive side up, insert the battery (1) onto the battery socket at an angle, and then press
the battery (2) down until it locks into place. The battery holder automatically secures the battery in
the proper position.
4. Insert the cover (1) onto the battery socket at an angle, and then press the cover (2) down until it
locks into place.
Optical drive
To remove the optical drive, use these procedures.
Optical drive
25
To Next Page
Loading...
