3. Thoroughly clean the thermal material from the surfaces of the heat sink and the system board
components each time the heat sink is removed. Replacement thermal material is included with the
heat sink and system board spare part kits.
IMPORTANT: Tighten heat sink retaining screws in diagonally opposite pairs (as in an X) to evenly seat
the heat sink on the processor to avoid damage that could require replacing the system board.
To replace the heat sink, reverse the removal procedures.
Processor
To remove the processor, use these procedures.
Table 4-12
Processor descriptions and part numbers
Description Spare part number
Intel Core i7-14700 (2.1 GHz, 20 core, 65 W) N74714-003
Intel Core i5-14600 (2.7 GHz, 14 core, 65 W) N92025-003
Intel Core i5-14500 (2.6 GHz, 14 core, 65 W) N75105-003
Intel Core i5-14400 (2.5 GHz, 10 core, 65 W) N74716-003
Intel Core i3-14100 (3.5 GHz, 4 core, 60 W) N75827-003
Intel Core i7-13700 (2.1 GHz, 16 core, 65 W) N33971-003
Intel Core i5-13600 (2.7 GHz, 14 core, 65 W) N35170-003
Intel Core i5-13500 (2.5 GHz, 14 core, 65 W) N35169-003
Intel Core i5-13400 (2.5 GHz, 10 core, 65 W) N33975-003
Intel Core i3-13100 (3.4 GHz, 4 core, 60 W) N35171-003
Intel Core i7-12700 (2.1 GHz, 12 core, 65 W) M98125-003
Intel Core i5-12600 (3.3 GHz, 6 core, 65 W) N03179-003
Intel Core i5-12500 (3.0 GHz, 6 core, 65 W) N03178-003
Intel Core i5-12400 (2.5 GHz, 6 core, 65 W) M98123-003
Intel Core i3-12300 (3.5 GHz, 4 core, 60 W) N03177-003
Intel Core i3-12100 (3.3 GHz, 4 core, 60 W) N03176-003
Intel Pentium G7400 (3.7 GHz, 2 core, 46 W) N04494-003
Intel Celeron G6900 (3.4 GHz, 2 core, 46 W) N04493-003
Intel 300 (3.9 GHz, 2 core, 65 W) N75826-003
Before removing the processor, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 22).
2. Remove the access panel (see Access panel on page 23).
3. Remove the optical drive (see Optical drive on page 25).
4. Remove the front bezel (see Front bezel on page 26).
42
Chapter 4 Removal and replacement procedures
To Next Page
Loading...
