Table 6-1 Computer Setup Main (continued)
Option Description
Update System BIOS Network Configuration Settings
Lets you configure the network connection to the server that is the host for system firmware
updates.
Update BIOS Using Local Media
Lets you access files on either USB storage or the hard drive. The HP BIOS Update and Recovery
application included in BIOS Softpaqs at www.hp.com copies the BIOS file to the correct location on
the hard drive or USB device.
Change date and time Lets you update system date and time.
System IDs Let you set the following values:
● Asset Tracking Number
● Ownership Tag
Replicated Setup Back up current settings to USB device
Saves system configuration to a formatted USB flash media device.
Restore current settings from USB device
Restores system configuration from a USB flash media device.
Save Custom Defaults Saves the current system configuration settings as the custom default set.
Apply Custom Defaults
and Exit
Applies the custom default settings to the computer after rebooting. Does not apply to options in the
Security menu.
Apply Factory Defaults
and Exit
Restores the factory system configuration settings to the computer after rebooting. Does not apply
to options in the Security menu.
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Save Changes and Exit Saves changes to current system configuration, exits Computer Setup, and reboots.
Computer Setup Security
This table provides information about the Computer Setup Security menu.
NOTE: Support for specific Computer Setup options can vary, depending on the hardware
configuration.
72
Chapter 6 Computer Setup (F10) Utility
To Next Page
Loading...
