HP ProCurve 3500yl Series User Manual

Web and MAC Authentication
Configuring Web Authentication on the Switch
Configure the Switch for Web-Based Authentication
Command Page
Configuration Level
aaa port-access web-based dhcp-addr 4-18
aaa port-access web-based dhcp-lease 4-18
[no] aaa port-access web-based [e] < port-list > 4-19
[auth-vid] 4-19
[client-limit] 4-19
[client-moves] 4-19
[logoff-period] 4-20
[max-requests] 4-20
[max-retries] 4-20
[quiet-period] 4-20
[reauth-period] 4-20
[reauthenticate] 4-20
[redirect-url 4-21
[server-timeout] 4-21
[ssl-login] 4-21
[unauth-vid] 4-22
Syntax: aaa port-access web-based dhcp-addr <ip-address/mask>
Specifies the base address/mask for the temporary IP
pool used by DHCP. The base address can be any valid
ip address (not a multicast address). Valid mask range
value is <255.255.240.0 - 255.255.255.0>.
(Default: 192.168.0.0/255.255.255.0)
Syntax: aaa port-access web-based dhcp-lease <5 - 25>
Specifies the lease length, in seconds, of the temporary
IP address issued for Web Auth login purposes.
(Default: 10 seconds)
4-18

HP ProCurve 3500yl Series Specifications

General

Model	HP ProCurve 3500yl Series
Switching Capacity	176 Gbps
Layer	Layer 3
Input Voltage	100-240 VAC
PoE	Available on some models
Management	Web, CLI, SNMP
Routing Protocol	RIP, OSPF, BGP
Remote Management Protocol	Telnet
Features	VLAN
Power Consumption Operational	Varies by model
Memory	256 MB
Power Supply	Internal
Security Features	802.1X, RADIUS, TACACS+
Ports	24 or 48 x 10/100/1000Base-T ports