HP ProCurve 3500yl Series User Manual

Configuring Secure Shell (SSH)
Messages Related to SSH Operation
Messages Related to SSH Operation
Message Meaning
00000K Peer unreachable. File transfer did not occur. Indicates an error in
communicating with the tftp server or not finding the file to
download. Causes include such factors as:
• Incorrect IP configuration on the switch
• Incorrect IP address in the command
• Case (upper/lower) error in the filename used in the
command
• Incorrect configuration on the TFTP server
• The file is not in the expected location.
• Network misconfiguration
• No cable connection to the network
00000K Transport error. File transfer did not occur. lIndicates the switch
experienced a problem when trying to copy tftp the
requested file. The file may not be in the expected directory,
the filename may be misspelled in the command, or the file
permissions may be wrong.
Cannot bind reserved TCP port
The ip ssh port command has attempted to configure a
<port-number>.
reserved TCP port. Use the default or select another port
number. See “Note on Port Number” on page 7-17.
Client public key file corrupt or not
The client key does not exist in the switch. Use copy
found. Use 'copy tftp pub-key-file <ip-
tftp to download the key from a TFTP server.
addr> <filename>' to download new file.
Download failed: overlength key in key The public key file you are trying to download has one of the
file. following problems:
• A key in the file is too long. The maximum key length is
Download failed: too many keys in key
1024 characters, including spaces. This could also mean
file.
that two or more keys are merged together instead of
being separated by a <CR><LF>.
Download failed: one or more keys is not
• There are more than ten public keys in the key file and
a valid public key.
switch total. Delete some keys from the switch or file. The
switch does not detect duplicate keys.
• One or more keys in the file is corrupted or is not a valid
rsa public key.
Refer to “To Create a Client-Public-Key Text File” on page
23 for information on client-public-key properties.
Error: Requested keyfile does not exist.
The client key does not exist in the switch. Use copy
tftp to download the key from a TFTP server.
7-27

HP ProCurve 3500yl Series Specifications

General

Model	HP ProCurve 3500yl Series
Switching Capacity	176 Gbps
Layer	Layer 3
Input Voltage	100-240 VAC
PoE	Available on some models
Management	Web, CLI, SNMP
Routing Protocol	RIP, OSPF, BGP
Remote Management Protocol	Telnet
Features	VLAN
Power Consumption Operational	Varies by model
Memory	256 MB
Power Supply	Internal
Security Features	802.1X, RADIUS, TACACS+
Ports	24 or 48 x 10/100/1000Base-T ports