Web and MAC Authentication
Show Status and Configuration of MAC-Based Authentication
Syntax: show port-access [port-list] web-based [config [auth-server]]
Shows Web Authentication settings for all ports or the
specified ports, along with the RADIUS server specific
settings for the timeout wait, the number of timeout
failures before authentication fails, and the length of
time between authentication requests.
Syntax: show port-access [port-list] web-based [config [web-server]]
Shows Web Authentication settings for all ports or the
specified ports, along with the web specific settings for
password retries, SSL login status, and a redirect URL,
if specified.
Syntax: show port-access port-list web-based config detail
Shows all Web Authentication settings, including the
Radius server specific settings for the specified ports.
Show Status and Configuration of MAC-
Based Authentication
Command Page
show port-access [
port-list] mac-based 4-27
[clients] 4-28
[config] 4-28
[config [auth-server]] 4-28
show port-access
port-list mac-based config detail 4-28
Syntax: show port-access [port-list] mac-based
Shows the status of all MAC-Authentication enabled
ports or the specified ports. The number of authorized
and unauthorized clients is listed for each port, as well
as its current VLAN ID. Ports without MAC Authenti-
cation enabled are not listed.
4-27
To Next Page
Loading...
Need help?
General
