HP ProCurve 3500yl Series User Manual

Traffic/Security Filters
Overview
Overview
Applicable Switch Models. As of October, 2005, Traffic/Security filters are
available on these current ProCurve switch models:
Switch Models Source-Port
Filters
Protocol
Filters
Multicast
Filters
Series 6400cl
Series 5400zl
Series 4200vl
Series 3500yl
Series 3400cl
Series 2800
Series 2500
Switch 4000m and 8000m
Yes No No
Yes Yes Yes
Yes No No
Yes Yes Yes
Yes No No
Yes No No
Yes Yes Yes
Yes Yes Yes
This chapter describes Traffic/Security filters on the switches covered in this
guide. For information on filters for other switches in the above table, refer
to the documentation provided for those switches.
Introduction
Feature Default Menu CLI Web
configure source-port filters none n/a page 9-21 n/a
configure protocol filters none n/a page 9-21 n/a
configure multicast filters none n/a page 9-21 n/a
display filter data n/a n/a page 9-23 n/a
9-2

HP ProCurve 3500yl Series Specifications

General

Model	HP ProCurve 3500yl Series
Switching Capacity	176 Gbps
Layer	Layer 3
Input Voltage	100-240 VAC
PoE	Available on some models
Management	Web, CLI, SNMP
Routing Protocol	RIP, OSPF, BGP
Remote Management Protocol	Telnet
Features	VLAN
Power Consumption Operational	Varies by model
Memory	256 MB
Power Supply	Internal
Security Features	802.1X, RADIUS, TACACS+
Ports	24 or 48 x 10/100/1000Base-T ports