To Next Page

To Previous Page

TACACS+ Authentication

Configuring TACACS+ on the Switch

Viewing the Switch’s Current TACACS+

Server Contact Configuration

This command lists the timeout period, encryption key, and the IP addresses

of the first-choice and backup TACACS+ servers the switch can contact.

Syntax: show tacacs

For example, if the switch was configured for a first-choice and two backup

TACACS+ server addresses, the default timeout period, and paris-1 for a

(global) encryption key, show tacacs would produce a listing similar to the

following:

First-Choice

TACACS+ Server

Second-Choice

TACACS+ Server

Third-Choice

TACACS+ Server

Figure 5-3. Example of the Switch’s TACACS+ Configuration Listing

5-10

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 3500yl Series and is the answer not in the manual?

HP ProCurve 3500yl Series Specifications

General

Model	HP ProCurve 3500yl Series
Switching Capacity	176 Gbps
Layer	Layer 3
Input Voltage	100-240 VAC
PoE	Available on some models
Management	Web, CLI, SNMP
Routing Protocol	RIP, OSPF, BGP
Remote Management Protocol	Telnet
Features	VLAN
Power Consumption Operational	Varies by model
Memory	256 MB
Power Supply	Internal
Security Features	802.1X, RADIUS, TACACS+
Ports	24 or 48 x 10/100/1000Base-T ports