HP ProCurve 3500yl Series User Manual

Key Management System
Configuring Key Chain Management
Adds a new Time-Independent
key to the “Procurve1” chain.
Displays keys in the key chain
entry.
Figure 13-2. Example of Adding and Displaying a Time-Independent Key to a Key Chain Entry
Assigning Time-Dependent Keys to a Chain
A time-dependent key has Accept or Send time constraints. It is valid only
during the times that are defined for the key . If a time-dependent key is used,
there is usually more than one key in the key chain entry.
Syntax: [no] key-chain < chain_name > key < key_id >
Generates or deletes a key in the key chain entry
< chain_name >. Using the optional no form of the
command deletes the key. The < key_id > is any
number from 0-255.
[ key-string < key_str > ]
This option specifies the key value referenced by the
protocol using the key. The < key_str > can be any
string up to 14 characters in length.
accept-lifetime < mm/dd/yy [ yy ] hh:mm:ss | now >
Specifies the start date and time of the valid period
in which the switch can use this key to authenticate
inbound packets.
13-5

HP ProCurve 3500yl Series Specifications

General

Model	HP ProCurve 3500yl Series
Switching Capacity	176 Gbps
Layer	Layer 3
Input Voltage	100-240 VAC
PoE	Available on some models
Management	Web, CLI, SNMP
Routing Protocol	RIP, OSPF, BGP
Remote Management Protocol	Telnet
Features	VLAN
Power Consumption Operational	Varies by model
Memory	256 MB
Power Supply	Internal
Security Features	802.1X, RADIUS, TACACS+
Ports	24 or 48 x 10/100/1000Base-T ports