HP ProCurve 3500yl Series User Manual

Configuring Secure Socket Layer (SSL)
Terminology
■ Root Certificate: A trusted certificate used by certificate authorities to
sign certificates (CA-Signed Certificates) and used later on to verify that
authenticity of those signed certificates. Trusted certificates are distrib-
uted as an integral part of most popular web clients. (see browser docu-
mentation for which root certificates are pre-installed).
■ Manager Level: Manager privileges on the switch.
■ Operator Level: Operator privileges on the switch.
■ Local password or username: A Manager-level or Operator-level pass-
word configured in the switch.
■ SSL Enabled: (1)A certificate key pair has been generated on the switch
(web interface or CLI command: crypto key generate cert [key size]
(2) A certificate been generated on the switch (web interface or CLI
command: crypto host-cert generate self-signed [arg-list]) and (3)
SSL is enabled (web interface or CLI command: web-management ssl).
(You can generate a certificate without enabling SSL, but you cannot
enable SSL without first generating a Certificate.
8-4

HP ProCurve 3500yl Series Specifications

General

Model	HP ProCurve 3500yl Series
Switching Capacity	176 Gbps
Layer	Layer 3
Input Voltage	100-240 VAC
PoE	Available on some models
Management	Web, CLI, SNMP
Routing Protocol	RIP, OSPF, BGP
Remote Management Protocol	Telnet
Features	VLAN
Power Consumption Operational	Varies by model
Memory	256 MB
Power Supply	Internal
Security Features	802.1X, RADIUS, TACACS+
Ports	24 or 48 x 10/100/1000Base-T ports