HP ProCurve 3500yl Series User Manual

Configuring Secure Socket Layer (SSL)
Configuring the Switch for SSL Operation
Note s “Zeroizing” the switch’s server host certificate or key automatically disables
SSL (sets web-management ssl to No). Thus, if you zeroize the server host
certificate or key and then generate a new key and server certificate, you must
also re-enable SSL with the web-management ssl command before the switch
can resume SSL operation.
CLI Command to view host certificates.
Syntax: show crypto host-cert
Displays switch’s host certificate
To view the current host certificate from the CLI you use the show crypto host-
cert command.
For example, to display the new server host certificate:
Show host certificate command
Figure 8-4. Example of show crypto host-cert command
8-12

HP ProCurve 3500yl Series Specifications

General

Model	HP ProCurve 3500yl Series
Switching Capacity	176 Gbps
Layer	Layer 3
Input Voltage	100-240 VAC
PoE	Available on some models
Management	Web, CLI, SNMP
Routing Protocol	RIP, OSPF, BGP
Remote Management Protocol	Telnet
Features	VLAN
Power Consumption Operational	Varies by model
Memory	256 MB
Power Supply	Internal
Security Features	802.1X, RADIUS, TACACS+
Ports	24 or 48 x 10/100/1000Base-T ports