HP ProCurve 3500yl Series User Manual

Configuring Port-Based and Client-Based Access Control (802.1X)
802.1X Open VLAN Mode
802.1X Per-Port Configuration Port Response
Open VLAN Mode with Only an Authorized-Client VLAN Configured:
•
•
•
Port automatically blocks a client that cannot initiate an
authentication session.
If the client successfully completes an authentication session, the
port becomes an untagged member of this VLAN.
If the port is statically configured as a tagged member of any other
VLAN, the port returns to tagged membership in this VLAN upon
successful client authentication. This happens even if the RADIUS
server assigns the port to another, authorized VLAN. If the port is
already configured as a tagged member of a VLAN that RADIUS
assigns as an authorized VLAN, then the port becomes an
untagged member of that VLAN for the duration of the client
connection.
Note: An authorized-client VLAN configuration can be overridden
by a RADIUS authentication that assigns a VLAN. (Refer to figure
10-1 on page 10-11.)
10-30

HP ProCurve 3500yl Series Specifications

General

Model	HP ProCurve 3500yl Series
Switching Capacity	176 Gbps
Layer	Layer 3
Input Voltage	100-240 VAC
PoE	Available on some models
Management	Web, CLI, SNMP
Routing Protocol	RIP, OSPF, BGP
Remote Management Protocol	Telnet
Features	VLAN
Power Consumption Operational	Varies by model
Memory	256 MB
Power Supply	Internal
Security Features	802.1X, RADIUS, TACACS+
Ports	24 or 48 x 10/100/1000Base-T ports