The SATA data cable is a thin, seven-pin cable designed to transmit data for only a single drive.
Cable management
Always follow good cable management practices when working inside the computer.
● Keep cables away from major heat sources like the heat sink.
● Keep cables clear of sliding or moveable parts to prevent them from being cut or crimped when the parts
are moved.
● When folding a at ribbon cable, never fold to a sharp crease. Sharp creases can damage the wires.
● Do not bend any cable sharply. A sharp bend can break the internal wires.
● Never bend a SATA data cable tighter than a 30 mm (1.18 in) radius.
● Never crease a SATA data cable.
20 Chapter 3 Routine care, SATA drive guidelines, and disassembly preparation ENWW
To Next Page
Loading...
