HP ProDesk 400 G7 SFF

Table 6-1 Computer Setup—Main (continued)
Option Description
■ Daily
■ Weekly
■ Monthly (default)
● Network Conguration Settings
● Update BIOS Using Local Media
Lets you access les on either USB storage or the hard drive. The HP BIOS Update and Recovery
application included in BIOS Softpaqs at www.hp.com copies the BIOS le to the correct location on the
hard drive or USB device.
Change date and time Lets you update system date and time.
Set machine unique data Allows you to set or view data that is unique to each machine, such as feature byte, build ID, serial number,
SKU number, product family, system board CT number, and product name.
System IDs Lets you set the following values:
● Asset Tracking Number
● Ownership Tag
Replicated Setup Backup current settings to USB device
Saves system conguration to a formatted USB ash media device.
Restore current settings from USB device
Restores system conguration from a USB ash media device.
Save Custom Defaults Saves the current system conguration settings as the custom default set.
Apply Custom Defaults
and Exit
Applies the custom default settings to the computer after rebooting. Does not apply to options in the
Security menu.
Apply Factory Defaults and
Exit
Restores the factory system conguration settings to the computer after rebooting. Does not apply to
options in the Security menu.
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Save Changes and Exit Saves changes to current system conguration, exits Computer Setup, and reboots.
Suppress POST errors Select to turn o any errors generated by Power On Self Test (POST) during boot up.
Computer Setup—Security
This table provides information about the Computer Setup Security menu.
NOTE: Support for specic Computer Setup options can vary, depending on the hardware conguration.
ENWW Computer Setup—Security 79