HP ProDesk 400 G7 SFF Service Manual

Cause Solution
The network controller is not congured properly. Verify network connectivity, that a DHCP Server is present, and that
the Remote System Installation Server contains the network
interface card (NIC) drivers for your NIC.
System setup utility reports unprogrammed EEPROM
Use this information to troubleshoot the computer.
Cause Solution
Unprogrammed EEPROM. Contact an authorized service provider.
68 Chapter 5 Troubleshooting without diagnostics ENWW

HP ProDesk 400 G7 SFF Specifications

General

Chipset	Intel B460
Form Factor	Small Form Factor
Processor	10th Gen Intel Core i3/i5/i7
Memory	Up to 64 GB DDR4-2933 SDRAM
Storage	Up to 2 TB HDD; Up to 1 TB SSD
Graphics	Intel UHD Graphics 630
Operating System	Windows 10 Pro; Windows 10 Home; FreeDOS
Ports	RJ-45
Expansion Slots	1 PCIe x16, 1 PCIe x1
Dimensions	27 x 30.3 x 9.5 cm
Power Supply	180 W internal power supply