HP ProLiant BL30p Setup And Installation Guide

Server Blade Setup
Figure 3-2: Removing a 3U server blade blank
NOTE: Store the ProLiant BL30p server blade blank for future use.
Installing a Blade Sleeve
CAUTION: Be sure that the ProLiant BL30p server blade is installed in a server
blade enclosure with enhanced backplane components. Installing a ProLiant BL30p
server blade in a server blade enclosure without enhanced backplane components
can damage the power subsystem.
1. Remove the server blade blank. Refer to “Removing a Server Blade Blank.”
2. Align the keyed end of the blade sleeve with the guide in the of a bay of the
server blade enclosure.
IMPORTANT: The blade sleeve is keyed to fit only one way in the bay. If the blade
sleeve does not slide easily into the bay, be sure that the blade sleeve is oriented
properly.
HP ProLiant BL30p Server Blade Setup and Installation Guide 3-3

HP ProLiant BL30p Specifications

General

Brand	HP
Model	ProLiant BL30p
Category	Server
Language	English