HP ProLiant BL30p

Server Blade Troubleshooting
Server Blade Diagnostic Steps
If the server blade does not power up, or powers up but does not complete POST,
answer the questions in Table A-1 to determine appropriate actions based on the
symptoms observed. According to the answers you give, you are directed to the
appropriate table that immediately follows.
Table A-1: Diagnostic Steps
Question Action
Question 1: Is the server blade power
on/standby LED illuminated?
If yes, continue to question 2.
If no, refer to Table A-2.
Question 2: Is the server blade power
on/standby LED green?
If yes, continue to question 3.
If no, refer to Table A-3.
Question 3: Is the server blade health LED solid
green?
If yes, continue to question 4.
If no, refer to Table A-4.
Question 4: Is the iLO remote console
displaying error information?
If yes, use the POST messages for further
diagnosis. Refer to Table A-5 for details.
If no, refer to Table A-5.
HP ProLiant BL30p Server Blade Setup and Installation Guide A-5