HP ProLiant BL30p

Server Blade Configuration and Utilities
</MOD_ISIP_SETTINGS>
</RACK_INFO>
</LOGIN>
</RIBCL>
Modify Network Settings to enable Static IP Bay Configuration
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="Admin" PASSWORD="password">
<RIB_INFO MODE="write">
<MOD_NETWORK_SETTINGS>
<ISIP_ENABLE VALUE="Yes"/>
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
Refer to the HP Integrated Lights-Out User Guide for information on DHCP and the
manual setting of IP addresses.
Deployment Methods
Four primary deployment methods are supported:
IMPORTANT: To deploy a server blade without the RDP, you must create a bootable
diskette or image of a bootable diskette.
•
•
•
•
PXE Deployment
CD-ROM Deployment
Diskette image deployment
Boot from SAN
5-26 HP ProLiant BL30p Server Blade Setup and Installation Guide