HP ProLiant BL30p

Server Blade Troubleshooting
Table A-4: Is the Server Blade Health LED Solid Green?
Answer Possible Reasons Possible Solutions
No, it is amber. A processor is in pre-failure
condition.
A DIMM is in pre-failure condition.
The memory bank has mismatched
DIMMs installed.
The memory bank has an
unsupported DIMM type installed.
Do the following:
1. Remove the server blade from the
server blade enclosure.
2. With the system powered down,
remove the access panel.
3. Visually inspect the system for
damage.
4. Reseat or replace processors
and/or DIMMs.
5. Be sure that the proper connections
exist among the power converter
module, system board, and power
button/LED board.
6. Reinstall the access panel.
7. Reinstall and power up the server
blade.
continued
HP ProLiant BL30p Server Blade Setup and Installation Guide A-9