Figure 54
Add Us ers and Groups dia log box
7. Highlight the desired user or group, and then click Add.
8. Select the Type of Access in the drop down list.
Type of Access can also be set from the Access Through Share Permissions d ialog box.
9. Click O
K when all users and groups have been added.
10. Click OK in the Create Volume dialog box.
11. Click Close.
Modifying NCP share properties
To modify a file sha re:
1. From the storage server desktop, select Start > Settings > Control Panel > Administrative Tools >
Server Mana ger.
2. Select File and Print Services for NetWare > Shared Volumes.
3. Highlight the volume to modif y.
4. Click Properties.
Prin
tServicesforNetWare
With File and Print Services for NetWare installed, the print server or File Print Appliance appears to a
NetWare client as a NetWare 3.x–compatible print server. Print ser vices presents the same dialog boxes
to the client as a NetWare-based server uses to process a print job from a client. A user can display and
sea
rch for printers on the print server or File Print Appliance just like in a NetWare environment.
114
Other network file and print services
To Next Page
Loading...
