1. After the storage subsystem is confi rmed to be operating normally, power up a single node. Wait for
the node to come completely up before powering up the subsequent node.
Ifmorethanonenodeispoweredupatthesametime,thefirst n ode that completes the sequence
gains ownership of the cluster quorum and controls the cluster database. Designate a particular
node as the usual cluster quorum owner by always powering up that node first and letting it
completely restart before p owering up additional cluster node(s).
2. Power up the add itional cluster node(s). Each node should be allowed to start fully, prior to starting
asubsequentnode.
As each node starts, the monitor displays the lo gon dialog. Background processes start the cluster
service and form the cluster.
Additional
information and r eferences for cluster services
The following Web sites provide detailed information for clustered environments for Windows Server
2003, which also applies to Windows Storager Server 2003:
• Cluster ser
vices
h
ttp://www.microsoft.com/windowsserver2003/technologies/clustering/default.mspx
• How to: Set up a clustered print server
h
ttp://sup
port.microsoft.com/default.aspx?scid=kb; en-us;278455
• How to: Set up a print spooler on Microsoft Cluster Server
h
ttp://support.microsoft.com/kb/197046/
• How to: Tro
ubleshootprintingissuesonaWindowsServer2003Cluster
h
ttp://su
pport.microsoft.com/default.aspx?scid=kb;en-us;302539
• Creating and configuring a highly available print ser ver under Microsoft Windows Server 2003
using a server cluster
h
ttp://www.microsoft.com/WindowsServer2003/techinfo/overview/availableprinter.mspx
140
Cluster adm inistration
To Next Page
Loading...
