1. Select Start > Settings > Control Panel > Add or Remove Programs.TheAddorRemovePrograms
window is displayed.
2. Ontheleftsideofthewindow,selectAdd/Remove Windows Com pon e nts. The Windows
Components Wizard appears.
3. Select Other Network File and Print Services and click the Details button. The O ther Network
File and Print Services window is displayed.
4. Check t he Microsoft Services for NFS subcomponent.
5. Click OK,thenNext, followed by Finish.
6. After NFS is installed, you can view the details of the Microsoft Services for NFS subcomponent to see
which of i ts subcomponents were i nstalled. The figure below shows the subcomponents preinstalled
at the factory. Verify that the Server for NFS and User Name Mapping services have been reinstalled.
Checklists for cluster server installation
These checklists assist in preparing for installation. Step-by-step instructions begin after the checklists.
Network requirements
• Auniqu
e NetBIOS cluster nam e.
• For each node deployed in the cluster the following static IP ad dresses are required:
• One for the network adapters on the private network.
•Onefo
r the network adapters o n the public network.
• One for the virtual server itself.
A sing le static cluster IP address is required for the entire cluster.
• Adoma
in user account for Cluster service (all nodes must be members of the same domain) .
• Each node should have at least two net work adapters—one for connection to the public net work
and the other for the node-to-node private cluster network. If only one network adapter is used
for b
oth connections, the configuration is unsupported. A separate private network adapter is
requ
ired for HCL certification.
126
Cluster adm inistration
To Next Page
Loading...
