NOTE:
The ACU is used to configure and manage array-based storage. Software RAID-based storage servers
use Microsoft Disk Manager to manage storage. You nee d admi nistrator or root privileges to run the
ACU.
Arr ay Configuration Utility
The H P ACU suppor ts the Sma r t Array controllers and SCSI hard drives installed on the storage server.
To open the ACU from the storage server desktop:
NOTE:
If this is the first time that the ACU is being run, you will be prompted to select the Execution Mode for
ACU. Selecting Local Application Mode allows you to run the ACU fr om a Remote Desktop , Remote
Console, or storage server web access mo des. Remote Service Mode allows you to access the ACU
from a remote browser.
1. Select Star t > Programs > HP Management Tools > Array Configuration Utility.
2. If the Execution M ode for ACU is set to Remote M o d e, log i n to the HP System Management
Homepage. The default user name is administrator and the default password is hpinvent.
To open the ACU in browser m o de:
NOTE:
Confirm that the A CU Extension Mode is set to remote service.
1. Open a browser and enter the server name or I P address of the destination server. For example,
http://ser vername:2301 or http://192.0.0.1:2301.
HPProLiantDL380G5StorageServer
55
To Next Page
Loading...
