Integrated Smart Update ToolsIntegrated Smart Update Tools
Integrated Smart Update Tools (SUT) is the smart update solution for performing online firmware and driver updates. SUT is used with
iLO 4, iLO 5, and with update solutions (management appliances such as iLO Amplifier Pack or HPE OneView and Smart Update
Manager to stage, install, and activate firmware and driver updates.
The solution must be installed on the operating system, where it updates results through Rich Infrastructure Services (RIS)
communication.
SUTSUT: Polls iLO to check for requests from SUM, iLO Amplifier Pack, or HPE OneView for updates through local iLO using the iLO
channel interface driver installed on the OS and orchestrates staging, deploying, and activating updates. You can adjust the polling
interval by issuing the appropriate command-line option provided by SUT. Performs inventory on target servers, stages
deployment, deploys updates, and then reboots the servers.
iLO 5 with integrated Smart UpdateiLO 5 with integrated Smart Update (Gen10 or later servers only): Performs iLO Repository-based updates by downloading the
components from iLO Repository when iLO Installation Queue has the components which can be updated by SUT.
iLO Amplifier PackiLO Amplifier Pack and HPE OneView and HPE OneView: Displays available updates for servers. Communicates with SUT (or SUT 1.x) to initiate
updates using the iLO Redfish interface. SUT reports the status of updates to iLO Amplifier Pack through iLO Restful Interface.
SUMSUM: A tool for firmware and driver maintenance for HPE ProLiant servers and associated options.
NOTE:NOTE:
SUM and iLO Amplifier Pack should not manage the same nodes.
To Next Page
Loading...
