HP ProLiant ML30 Gen10 User Manual

Table of contentsTable of contents
1 Component identification
1.1 Front panel components
1.2 Front panel LEDs and button
1.2.1 Front panel LED power fault codes
1.3 Rear panel components
1.4 Rear panel LEDs
1.5 System board components
1.5.1 System maintenance switch descriptions
1.5.2 DIMM label identification
1.5.3 DIMM slot locations
1.5.4 PCI expansion slot definitions
1.6 Drive LEDs and buttons
1.6.1 Low-profile LFF drive LED definitions
1.6.2 Smart Carrier (SC) drive LED definitions
1.7 Drive bay numbering
1.8 Fan numbering
1.8.1 Fan mode behavior
1.9 Media device screws
2 Operations
2.1 Power up the server
2.2 Power down the server
2.3 Extend the server from the rack
2.4 Remove the server from the rack
2.5 Slide the server into the rack
2.6 Remove the front bezel
2.7 Install the front bezel
2.8 Remove the access panel
2.9 Install the access panel
2.10 Remove the air baffle
2.11 Install the air baffle
2.12 Remove the PCI slot blank retainer
2.13 Remove the PCI slot blank
2.14 Position the tower server for hardware configuration
2.15 Position the tower server for operation
3 Setup
3.1 Initial system installation
3.1.1 HPE Installation Service
3.1.2 Setting up the server
3.2 Operational requirements
3.2.1 Space and airflow requirements
3.2.2 Temperature requirements
3.2.3 Power requirements

HP ProLiant ML30 Gen10 Specifications

General

Bus type	DMI3
Tjunction	100 °C
Scalability	1S
Processor cache	8 MB
Processor model	E-2124
System bus rate	8 GT/s
Processor socket	LGA 1151 (Socket H4)
Processor threads	4
Processor codename	Coffee Lake
Execute Disable Bit	Yes
Processor frequency	3.3 GHz
Processor cache type	Smart Cache
Processor lithography	14 nm
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor boost frequency	4.3 GHz
Processor operating modes	64-bit
Embedded options available	No
PCI Express configurations	1x16, 2x8, 1x8+2x4
Supported instruction sets	AVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)	71 W
Number of processors installed	1
Maximum number of PCI Express lanes	16
Memory types supported by processor	DDR4-SDRAM
Memory clock speeds supported by processor	2666 MHz
Memory bandwidth supported by processor (max)	41.6 GB/s
Maximum internal memory supported by processor	128 GB
On-board graphics card model	-
Internal memory	8 GB
Maximum internal memory	64 GB
Memory layout (slots x size)	1 x 8 GB
HDD size	- \
Supported HDD sizes	3.5 \
Total storage capacity	0 GB
Maximum storage capacity	- TB
Number of HDDs installed	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	5
Chassis type	Tower (4U)
Product color	Black
Power supply	350 W
Ethernet interface type	Gigabit Ethernet
PCI Express slots version	3.0
Processor ARK ID	134856
Intel Secure Key Technology version	1.00

Weight and Dimensions

Depth	475 mm
Width	175 mm
Height	368.3 mm