Install the access panelInstall the access panel
ProcedureProcedure
1. Install the access panel:
a. Place the access panel on the chassis and slide it toward the front of the server.
b. Tighten the access panel thumbscrew.
2. Install the front bezel
.
3. Do one of the following:
If the server is in tower mode: Position the tower server for operation .
If the server is in rack mode: Install the server on the tray.
4. If removed, install the security padlock and/or Kensington security lock.
For more information, see the lock documentation.
5. Connect all peripheral cables to the server.
6. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
7. Power up the server
.
To Next Page
Loading...
