Software and configuration utilities 132
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes.
Software or configuration utility Server mode
HP iLO (on page 132)
Online and Offline
Active Health System (on page 133)
Online and Offline
HP RESTful API support for HP iLO (on page 134)
Online and Offline
Integrated Management Log (on page 134)
Online and Offline
HP Insight Remote Support (on page 135)
HP Insight Online (on page 135)
Online
Intelligent Provisioning (on page 135)
Offline
HP Insight Diagnostics (on page 136)
Online and Offline
Erase Utility (on page 136)
Offline
Scripting Toolkit for Windows and Linux (on page 137)
Online
HP Service Pack for ProLiant (on page 137)
Online and Offline
HP Smart Update Manager (on page 137)
Online and Offline
HP UEFI System Utilities (on page 138)
Offline
HP Smart Storage Administrator (on page 141)
Online and Offline
FWUPDATE utility (on page 143)
Offline
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
HP iLO
The iLO subsystem is a standard component of HP ProLiant servers that simplifies initial server setup, server
health monitoring, power and thermal optimization, and remote server administration. The iLO subsystem
includes an intelligent microprocessor, secure memory, and a dedicated network interface. This design
makes iLO independent of the host server and its operating system.
iLO enables and manages the Active Health System (on page 133) and also features Agentless
Management. All key internal subsystems are monitored by iLO. If enabled, SNMP alerts are sent directly by
iLO regardless of the host operating system or even if no host operating system is installed.
Embedded remote support software is available on HP ProLiant Gen8 and later servers with iLO 4, regardless
of the operating system software and without installing OS agents on the server.
To Next Page
Loading...
