HP ProLiant ML350 Gen9

Component identification 17
Connector Description
2
GPU Power cable connector (optional)
3
2x20-pin System board signal cable connector
4
2x12-pin System board power cable connector
5
2x4-pin System board power cable connector
6
Drive boxes 1, 2, 3 (LFF configuration) or 4, 5, 6 (SFF
configuration) backplane power cable connector
• x4 power supply backplane
Connector Description
1
GPU Power cable connector (optional)
2
GPU Power cable connector (optional)
3
Drive boxes 1,2,3 backplane power cable connector
4
Drive boxes 4,5,6 backplane power cable connector
5
2x4 System board power cable connector
6
2x12 System board power cable connector
7
2x20 System board signal cable connector
8
GPU Power cable connector (optional)
9
GPU Power cable connector (optional)
Using the Systems Insight Display
The HP Systems Insight Display (SID) is only available as an option for rack configurations.
1. Remove the security bezel ("Remove the security bezel (optional)" on page 30), if installed.