Hardware options installation 87
7. Install the fan, making sure that the fan clicks into place.
8. Install the PCIe air baffles.
9. Install the access panel (on page 32).
10. Do one of the following:
o If the server is in a tower configuration, return the server to an upright position.
o If the server is in a rack configuration, slide the server into the rack.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server (on page 29).
14. Do one of the following:
o For tower models, install the tower bezel (on page 31).
o For rack models, install the security bezel ("Security bezel option" on page 48).
To Next Page
Loading...
