HP T3500

The printer’s internal prints
The internal prints give various kinds of information about your printer. They can be requested from the front
panel.
Before requesting any internal print, check that the printer and the paper are ready for printing.
●
The loaded paper should be at least A3 landscape—420 mm (16.53in) wide—otherwise the print may
be clipped.
●
The front panel should be displaying the Ready message.
To print any internal print, press , then scroll down to Internal prints and press it, then select the
internal print you want. The following internal prints are available.
●
Demo prints show some of the capabilities of the printer
◦
Print drawing demo
◦
Print rendering demo
◦
Print GIS map
●
User information prints
◦
Usage report shows estimates of the total number of prints, number of prints by paper type,
number of prints by print-quality option, counting of scans, and total amount of ink used per color
(the accuracy of these estimates is not guaranteed)
◦
HP-GL/2 palette shows the color or grayscale definitions in the currently selected color palette
◦
PostScript font list shows PostScript fonts available (PostScript printers only)
●
Service information prints
◦
Print current information
◦
Print usage information
◦
Print event logs
◦
Print calibration status
◦
Print connectivity configuration
◦
Print all pages (prints all the above reports)
ENWW The printer’s internal prints 13