To configure global network settings:
1. Click Control Panel > Setup > Global Network Settings.
2. Configure the global network on three tabs:
●
General
●
Ethernet
●
Hosts
3. Click Close to save your settings and close the dialog box.
Language
1. Click Control Panel > Setup > Language.
2. Select the language you want to use.
3. Click OK to save your changes and close the dialog box.
NOTE: The language can also be set by configuring DHCP tag 192 as a string whose value is English,
German, Spanish, French, Japanese, or Simplified Chinese.
Network Connections
96 Chapter 2 Installation ENWW
To Next Page
Loading...
