To delete a wireless connection:
1. Click the Wireless tab.
2. Select the connection you want to remove and click Delete.
3. Click Delete to confirm that you want to delete the connection.
4. Click Close to close the dialog box.
VPN Connection
To add a VPN connection:
1. Click the VPN tab, and then click Add.
2. Select a VPN connection type and click Create.
3. Choose whether or not to Connect automatically.
4. Configure the new setting by completing the information on the two tabs:
●
VPN
●
IPv4 Settings
5. Click Apply to apply your settings and close the dialog box.
100 Chapter 2 Installation ENWW
To Next Page
Loading...
