Advanced
1. Set the following options:
●
Fallback Connection
●
Auto start priority
●
Auto reconnect
●
Allow the user to launch this connection
●
Allow the user to edit this connection
NOTE: 'Allow the user' options are available only in the Administrative Mode.
2. Click Finish save your settings and close the dialog box.
Custom
NOTE: This feature is neither present nor supported on the HP ThinPro image for the HP t5325 thin
client.
1. To add a Custom connection, click Connections > Add.
2. Select Custom and set the following option:
●
Configuration on page 72
ENWW Connections 71
To Next Page
Loading...
