Advanced
1. Set the following options:
●
Auto start priority
●
Auto reconnect
●
Allow the user to launch this connection
●
Allow the user to edit this connection
NOTE: 'Allow the user' options are available only in the Administrative Mode.
2. Click Finish save your settings and close the dialog box.
Xdmcp
NOTE: This feature is neither present nor supported on the HP ThinPro image for the HP t5325 thin
client.
1. To add an Xdmcp connection, click Connections > Add.
2. Select Xdmcp and set the following options:
●
Configuration on page 65
●
Advanced on page 67
64 Chapter 2 Installation ENWW
To Next Page
Loading...
