●
Allow the user to launch this connection
●
Allow the user to edit this connection
NOTE: 'Allow the user' options are available only in the Administrative Mode.
2. Click Finish save your settings and close the dialog box.
Telnet
1. To add a Telnet connection, click Connections > Add.
2. Select Telnet and set the following options:
●
Configuration on page 70
●
Advanced on page 71
Configuration
1. Set the following options:
●
Name
●
Address
●
Port
●
Style
◦
Foreground color
◦
Background color
◦
Font
2. Click Next to advance to the next window or click Finish save your settings and close the dialog
box.
70 Chapter 2 Installation ENWW
To Next Page
Loading...
