Wireless Connection
To add a wireless connection:
1. Click the Wireless tab, and then click Add.
2. Choose whether or not to Connect automatically.
3. Configure the new setting by completing the information on the three tabs:
●
Wireless
●
Wireless Security
●
IPv4 Settings
4. Click Apply to apply your settings and close the dialog box.
To edit a wireless connection:
1. Click the Wireless tab.
2. Select the connection you want to change and click Edit.
3. Change setting by revising the information on the three tabs:
●
Wireless
●
Wireless Security
●
IPv4 Settings
4. Click Apply to apply your settings and close the dialog box.
ENWW Control Panel 99
To Next Page
Loading...
