HP t5745 - Thin Client

Edit
1. To edit a connection, click a selection under Connection Name and then click Edit.
The connection settings window for that connection opens.
2. Edit the connection and click Apply.
3. Click OK.
User View
NOTE: This feature is available only in the Administrative Mode.
1. To change what connections are visible in the User Mode, click User View.
The Allow and Deny buttons appear above the Connection Name bar.
2. Select one or more of the connections listed.
3. Click Allow to allow the connections to be visible in the User Mode or click Deny to make the
connection unavailable in the User Mode.
4. Click User View again when you have completed your changes.
74 Chapter 2 Installation ENWW