1–28 Startup Guide
Setting Up the Tablet PC
Setting Up the Software
A prompt to set up your software is displayed on the screen when
the tablet PC is turned on for the first time.
Before responding to the prompt and proceeding through the
online instructions, read the following caution and installation
information.
Ä
CAUTION: To prevent file corruption and be sure that the correct device
drivers install, during software setup:
■ Do not unplug the tablet PC from the electrical outlet.
■ Do not shut down the tablet PC.
■ When you are prompted to press the F10 key, you must press
the
F10 key on a keyboard attached to the tablet PC. The
keyboard can be either a tablet PC keyboard or a standard
USB keyboard.
Identifying the F10 key on a tablet PC keyboard
334201-001.book Page 28 Tuesday, August 19, 2003 11:17 AM
To Next Page
Loading...
